Hot air rework station
SAIKE 863D hot air rework station for wider bench repair work
High power hot air rework station for PCB repair, SMD component removal and maintenance benches that need stronger hot air support.
Buyer fit
Where this model fits
Use this section to choose the model by repair task before checking detailed parameters and quotation options.
Repair shops
For repair benches that need stronger hot air capacity for daily rework and maintenance tasks.
Board repair work
Useful for PCB repair, component removal and wider heating tasks where compact models are not enough.
Distributor quotation
A stronger hot air-only option when buyers ask for more capable repair bench equipment.
Function overview
What the station helps you do
The summary below keeps the buyer focused on practical repair use, while the detailed information remains available below.
Hot air rework
The hot air gun supports SMD removal, heating, rework and common electronics maintenance.
Digital bench operation
Digital control helps operators confirm working temperature and repeated repair settings.
Focused station setup
The hot air-only direction keeps the bench focused on rework when soldering tools are handled separately.
Support items
Accessories and spare parts for quotation
These items help buyers plan after-sales support, repair bench setup and restocking. Confirm compatibility by model before bulk order.
Quoted according to order needs. They can be added when the buyer needs spare parts, nozzles, soldering support or bench consumables.
Replacement parts
- Hot air handle
- Hot air heating core
- Power switch and common service parts
Working accessories
- 8mm, 10mm and 12 x 12mm hot air nozzles
- Hot air gun holder
- Additional nozzle sizes for different component areas
Workbench items
- Cleaning sponge or brass wire for general bench maintenance
- Heat-shrink tubing for cable repair work
- Additional bench support items confirmed separately
Package direction
Standard package and order details
Host machine, hot air handle, holder, nozzle set and power cord should be confirmed by voltage, plug type and order requirement.
Need SAIKE 863D Hot air gun rework station Air blower type for repair shop, distributor or bulk order?
Send model, voltage, plug type, quantity and destination country. We can help confirm package options and quotation details.
Detailed product information
Features and technical specifications
This section keeps the feature descriptions and parameter tables for buyers who need detailed confirmation before inquiry.
Features
1.Using microcomputer processor PID program control technology, the program tracks the actual temperature of the hot air gun at a high speed in milliseconds, the fast temperature compensation speed enhances the temperature stability, the temperature static error is small, the temperature compensation is fast, and can adapt to various harsh environments.
2. The machine has self-detection function, and the intelligent overtemperature, short circuit, open circuit and overload fault are displayed and protected.
3. The back of the machine is provided with a fuse holder, and the exposed metal parts of each component are connected with a ground wire to provide comprehensive protection for the safety of electricity.
4. Hot air gun heater uses a higher level of hot air technology, which can quickly heat the welding point in a short time, so that it can achieve the ideal welding effect. At the same time, its powerful wind system can effectively protect the circuit board and components to prevent overheating.
5. The handle of the Hot air gun is equipped with an induction device, as long as the handle is picked up from the handle frame, the Hot air gun can quickly enter the working state; Put the handle back on the handle frame, the Hot air gun will stop heating, delay blowing cold air to cool down, and finally enter the standby state; Convenient real-time operation, while extending the service life of the heater.
6. Hot air gun handle comes with a one-click switch between cold air, hot air, and standby. Hold the handle and press the switch on the handle to switch the cold air or hot air mode. Press the switch for about two seconds, and the hot air gun will start to cool down and finally enter the standby state. Press the switch again for about two seconds, and the hot air gun will restart and enter the working state.
7. Hot air gun adopts the compressed motor blower as the air source, which has strong wind pressure, high air volume, adjustable air volume and low noise.
8. Hot air gun has three storage channel buttons, which can store three different temperatures and air volumes. In actual use, you can quickly switch to the specified temperature and air volume through the storage button, so as to quickly enter the working state. This design can greatly improve the work efficiency, while reducing the operation time, to avoid wasting time due to cumbersome operations.
Parameters
| Model: | 863D |
| Input voltage: | 220V~240V/AC, 50Hz |
| Power consumption: | 1000W |
| Weight: | 4.67kg |
| Inner box size: | 323*305*180mm |
| Packing quantity: | 3 pieces / box |
| Outer packing size: | 330*320*560mm |
| Hot air gun | |
| Working voltage: | 220V~240V/AC, 50Hz |
| Power consumption: | 1000W |
| Display form: | LED digital (Resolution 1℃) |
| Heating element: | Skeleton type ceramic heating core |
| Temperature range: | 100℃－500℃ |
| Temperature stability: | ±1℃ |
| Type of air flow: | Compressor Motor (Blower) |
| Gas flow: | 120 L/min(max) |
| Noise: | Less than 45dB |
| Handle length: | About 100cm(Including handle line) |
Standard Configuration
Host machine (include Hor air gun handle): 1 pcs
Hot air gun rack: 1 pcs
Nozzles: 3 pcs (5mm, 8mm, 10mm) Straight air outlet, 2 pcs (8mm, 10mm) Spiral air outlet.
User manual: 1 pcs
Application
1. Electronic product assembly
2. Product development in scientific research departments
3. Electronic products maintenance
4. Electrical soldering operation
5. Skill training in all kinds of electronic institutions
About the hot air gun
By generating a hot air flow, the solder is heated to a molten state, thus achieving welding, heat shrinkage, removal and other operations.
1. Suitable for a various kind of soldering or desoldering (removals) purposes of the electronic components, such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. (especially suitable for mobile phone wiring and wiring base sealing-off).
2. Can also be used for heat shrinkage, drying, paint removal, adhesion removal, thawing, preheating, glue welding, etc.
Related Names
BGA Rework Equipment | China Desoldering Station | Variable Temperature Soldering Station
Reviews
There are no reviews yet.