Digital air pump hot air
SAIKE 8508D air pump hot air rework station with digital display
Digital air pump hot air rework station for SMD repair, PCB maintenance and repair benches that need pump airflow with clearer temperature display.
Buyer fit
Where this model fits
Use this section to choose the model by repair task before checking detailed parameters and quotation options.
Repair shops
For buyers who need an air pump type station with digital display for daily hot air repair tasks.
Maintenance benches
Suitable for PCB repair, component removal and service work where pump airflow is preferred.
Distributor orders
A stronger air pump option than basic analog models when customers ask for display confirmation.
Function overview
What the station helps you do
The summary below keeps the buyer focused on practical repair use, while the detailed information remains available below.
Digital display support
The display helps operators check working temperature during repeated hot air repair.
Pump airflow control
Air pump airflow supports concentrated heating for SMD component removal and board maintenance.
Repair bench workflow
The station fits hot air-only benches that already use separate soldering tools.
Support items
Accessories and spare parts for quotation
These items help buyers plan after-sales support, repair bench setup and restocking. Confirm compatibility by model before bulk order.
Quoted according to order needs. They can be added when the buyer needs spare parts, nozzles, soldering support or bench consumables.
Replacement parts
- Hot air handle
- Hot air heating core
- Air pump service parts and common replacement parts
Working accessories
- 5mm, 8mm, 10mm and 12 x 12mm hot air nozzles
- Hot air gun holder
- Nozzle set by order requirement
Workbench items
- Cleaning sponge or brass wire
- Heat-shrink tubing
- Additional bench support items when needed
Package direction
Standard package and order details
Host machine, hot air handle, holder, nozzle set and power cord should be confirmed by voltage, plug type and order requirement.
Need SAIKE 8508D Hot air gun rework station Air pump type for repair shop, distributor or bulk order?
Send model, voltage, plug type, quantity and destination country. We can help confirm package options and quotation details.
Detailed product information
Features and technical specifications
This section keeps the feature descriptions and parameter tables for buyers who need detailed confirmation before inquiry.
Features
1.Using microcomputer processor PID program control technology, the program tracks the actual temperature of the hot air gun at a high speed in milliseconds, the fast temperature compensation speed enhances the temperature stability, the temperature static error is small, the temperature compensation is fast, and can adapt to various harsh environments.
2. The machine has self-detection function, and the intelligent overtemperature, short circuit, open circuit and overload fault are displayed and protected.
3. The back of the machine is provided with a fuse holder, and the exposed metal parts of each component are connected with a ground wire to provide comprehensive protection for the safety of electricity.
4. Hot air gun heater adopts the skeleton type ceramic heating core, and the high-quality production process significantly improves the reliability and stability, and increases the working life.
5. The handle of the Hot air gun is equipped with an induction device, as long as the handle is picked up from the handle frame, the Hot air gun can quickly enter the working state; Put the handle back on the handle frame, the Hot air gun will stop heating, delay blowing cold air to cool down, and finally enter the standby state; Convenient real-time operation, while extending the service life of the heater.
6. Hot air gun uses the air pump as the air source, the air flow pressure is large, and the silencer box is attached to reduce the noise.
7. Hot air gun has automatic and manual operating modes. Automatic mode, hot air gun on the shelf will automatically cooling standby; Manual mode, only turn off the hot air gun switch will automatically cool down and stop working; Both modes can be selected according to the requirements. (When the hot air gun is frequently used, the manual mode can be selected, saving the time of repeated heating, convenient and fast, and improving work efficiency!)
Note: Before using the new machine for the first time, please remove the air pump lock screw at the bottom of the main engine before using it. This is The air pump is secured for transportation. Remove the transport locking screw before operation so the pump can work normally. Otherwise, the air pump can not vibrate normally, resulting in great noise and damage to the machine.
Parameters
| Model: | 8508D |
| Input voltage: | 220V~240V/AC, 50Hz (110V/AC, 60Hz) |
| Power consumption: | 700W |
| Weight: | 3.31kg |
| Inner box size: | 330*274*180mm |
| Packing quantity: | 6 pieces / box |
| Outer packing size: | 560*345*550mm |
| Hot air gun | |
| Working voltage: | 220V~240V/AC, 50Hz (110V/AC, 60Hz) |
| Power consumption: | 700W |
| Display form: | LED digital (Resolution 1℃) |
| Heating element: | Skeleton type ceramic heating core |
| Temperature range: | 100℃－450℃ |
| Temperature stability: | ±1℃ |
| Type of air flow: | Air pump |
| Gas flow: | 24 L/min(max) |
| Noise: | Less than 45dB |
| Handle length: | About 100cm(Including handle line) |
Standard Configuration
Host machine (include Hor air gun handle): 1 pcs
Hot air gun rack: 1 pcs
Nozzles: 3 pcs (5mm, 8mm, 10mm)
User manual: 1 pcs
Application
1. Electronic product assembly
2. Product development in scientific research departments
3. Electronic products maintenance
4. Electrical soldering operation
5. Skill training in all kinds of electronic institutions
About the hot air gun
By generating a hot air flow, the solder is heated to a molten state, thus achieving welding, heat shrinkage, removal and other operations.
1. Suitable for a various kind of soldering or desoldering (removals) purposes of the electronic components, such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. (especially suitable for mobile phone wiring and wiring base sealing-off).
2. Can also be used for heat shrinkage, drying, paint removal, adhesion removal, thawing, preheating, glue welding, etc.
Related Names
BGA Rework Equipment | China Desoldering Station | Variable Temperature Soldering Station
Reviews
There are no reviews yet.