Air pump hot air rework
SAIKE 850 air pump hot air rework station for repair benches
Air pump type hot air rework station for PCB repair, SMD component removal and maintenance benches that prefer pump airflow.
Buyer fit
Where this model fits
Use this section to choose the model by repair task before checking detailed parameters and quotation options.
Repair shops
For technicians who need an air pump type hot air station for daily PCB and SMD repair work.
Service benches
Useful when the buyer prefers a traditional pump airflow station instead of a brushless fan hot air station.
Distributor stocking
A familiar model direction for markets that still request air pump hot air rework stations.
Function overview
What the station helps you do
The summary below keeps the buyer focused on practical repair use, while the detailed information remains available below.
Air pump airflow
The pump airflow supports concentrated hot air work for component removal and repair heating.
Temperature control
Adjustable temperature helps match common SMD repair, heat shrink and board maintenance tasks.
Bench station setup
The separate station body and handle support repeated repair bench use.
Support items
Accessories and spare parts for quotation
These items help buyers plan after-sales support, repair bench setup and restocking. Confirm compatibility by model before bulk order.
Quoted according to order needs. They can be added when the buyer needs spare parts, nozzles, soldering support or bench consumables.
Replacement parts
- Hot air handle
- Hot air heating core
- Air pump service parts and common switches
Working accessories
- 5mm, 8mm, 10mm and 12 x 12mm hot air nozzles
- Hot air gun holder
- Additional nozzle sizes by order requirement
Workbench items
- Cleaning sponge or brass wire
- Heat-shrink tubing
- Bench support items confirmed separately
Package direction
Standard package and order details
Host machine, hot air handle, holder, nozzle set and power cord should be confirmed by voltage, plug type and order requirement.
Need SAIKE 850 Hot air gun rework station Air pump type for repair shop, distributor or bulk order?
Send model, voltage, plug type, quantity and destination country. We can help confirm package options and quotation details.
Detailed product information
Features and technical specifications
This section keeps the feature descriptions and parameter tables for buyers who need detailed confirmation before inquiry.
Product Overview
SAIKE 850 hot air gun rework station Air pump type is a SAIKE repair tool for professional electronics repair work. 550W hot air gun rework station, air pump provides strong air pressure, scale indication.
Model Position
Use this model when the buyer needs a repair bench tool matched to its voltage, plug type, quantity and application requirements.
Key Features
- 1.PID temperature control tracks the working temperature quickly and supports fast temperature compensation.
- The machine has self-detection function, and the intelligent overtemperature, short circuit, open circuit and overload fault are displayed and protected.
- A rear fuse holder and grounded metal parts help improve electrical safety.
- The hot air gun heater uses the skeleton type ceramic heating core, and the the design supports stable operation and longer heater service life.
- hot air gun has the function of delay blowing cold air and automatic cooling. When the hot air gun switch is turned off, the hot air gun will stop heating. If the temperature is too high, the cold air will delay closing. It stops blowing after the temperature drops, thus extending the service life of the hot air gun.
- hot air gun uses the air pump as the air source, the air flow pressure is large, and the silencer box is attached to reduce the noise. Note: Before using the new machine for the first time, please remove the air pump lock screw at the bottom of the main engine before using it. This is The air pump is secured for transportation. Remove the transport locking screw before operation so the pump can work normally. Otherwise, the air pump can not vibrate normally, resulting in great noise and damage to the machine.
Component Function Notes
hot air gun
By generating a hot air flow, the solder is heated to a molten state, thus achieving welding, heat shrinkage, removal and other operations.
- Suitable for various kinds of soldering or desoldering work of the electronic components, such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. (especially suitable for mobile phone wiring and wiring base sealing-off).
- Can also be used for heat shrinkage, drying, paint removal, adhesion removal, thawing, preheating, glue welding, etc.
Technical Specifications
| Model | 850 |
| Input voltage | 220V~240V/AC, 50Hz (110V/AC, 60Hz) |
| Power consumption | 550W |
| Weight | 3.15kg |
| Inner box size | 330*274*180mm |
| Packing quantity | 6 pieces / box |
| Outer packing size | 560*345*550mm |
| hot air gun | |
|---|---|
| Working voltage | 220V~240V/AC, 50Hz (110V/AC, 60Hz) |
| Power consumption | 550W |
| Display form | scale indication (LED heating indicator) |
| Heating element | Skeleton type ceramic heating core |
| Temperature range | 100℃－450℃ |
| Temperature stability | ±1℃ |
| Type of air flow | Air pump |
| Gas flow | 24 L/min(max) |
| Noise | Less than 45dB |
| Handle length | About 100cm(Including handle line) |
Standard Configuration
- Host machine (include hot air gun handle): 1 pcs
- hot air gun rack: 1 pcs
- Nozzles: 3 pcs (5mm, 8mm, 10mm)
- User manual: 1 pcs
Typical Applications
- Electronic product assembly
- Product development in scientific research departments
- Electronic products maintenance
- Electrical soldering operation
- electronics training and repair education
Order and Configuration Notes
Please confirm rated voltage, power plug, order quantity and accessory requirements before production or shipment. For distributor orders, repair shop bundles or accessory kits, contact SAIKE with the target models and quantity so we can confirm a suitable configuration.
Reviews
There are no reviews yet.