PRODUCTS – SAIKE TOOL – Professional Hot Air Soldering Stations and Electronic Repair Equipment Supplier

SAIKE 868D Hot air gun rework station

SAIKE — Wed, 26 Jun 2024 04:00:57 +0000

SAIKE 868D hot air rework station

700W hot air rework station for repair benches

SAIKE 868D is a compact single hot air rework station for electronics repair shops, PCB rework, phone repair, SMD rework and training benches.

700W hot air rework

brushless fan soft wind

100C-480C temperature range

Request Quote
View Products

Compact single hot air station for model confirmation and buyer reference.

Buyer fit

Focused hot air rework for common repair bench jobs

Use 868D when the buyer needs a small bench unit focused on hot air rework and simple daily maintenance tasks.

Repair shops

Suitable for phone repair, PCB repair, SMD rework and daily electronics service work.

Distributors

A clear single-function hot air model for catalog listings, sample orders and bulk quotation inquiries.

Training benches

Useful for teaching hot air rework, component removal, preheating and heat-shrink operation.

Product video

See the 868D powered on for repair bench use

The video helps buyers check the real product appearance, front panel layout, handle setup and workbench scale before inquiry.

Shows the real 868D machine and operating panel.
Helps confirm the hot air handle, compact body and bench layout.
Useful for repair shop, distributor and sample-order discussions.

Real 868D product video for checking appearance, panel layout and bench setup.

Core functions

Focused hot air control for repair bench work

700W hot air rework

Hot air gun with skeleton type ceramic heating core, fast heating and stable temperature compensation.

Brushless fan airflow

Brushless fan air source provides adjustable airflow, soft wind, low noise and up to 120 L/min gas flow.

Lightweight body design

Transformer-free body design keeps the unit compact and easier to transport for distributor orders.

Component function guide

How the hot air section is normally used

Hot air gun

Generates hot airflow to heat solder into a molten state for rework, desoldering, component removal and preheating.

Suitable for SOIC, CHIP, QFP, PLCC, BGA, SMD and mobile phone wiring/base repair.

Auxiliary heating work

Can also support heat shrink, drying, paint removal, adhesion removal, thawing and glue welding tasks.

For different repair jobs, match the nozzle size to the component area and airflow requirement.

Handle standby operation

The hot air handle enters working state when picked up from the holder.

When returned to the holder, heating stops, cold air cooling starts and the unit enters standby state.

Operating details

Control, safety and hot air operation details

These details help buyers understand why the 868D is suitable for daily hot air repair bench work.

Temperature control

PID program control tracks actual hot air gun temperature in milliseconds.
Fast compensation helps keep hot air temperature stable during repair work.
LED digital display supports direct temperature reading and adjustment.

Protection design

Self-detection includes over-temperature, short circuit, open circuit and overload display/protection.
Internal fuse and grounded exposed metal parts improve electrical safety.
High integrated circuit design helps reduce product failure rate.

Hot air handle operation

Skeleton type ceramic heating core improves reliability, stability and working life.
The handle induction device lets the hot air gun quickly enter working state when picked up.
Returning the handle to the holder stops heating and starts cold air cooling before standby.

Airflow and noise

Brushless fan air source provides large adjustable airflow and gentle wind power.
Maximum gas flow reaches 120 L/min for common rework needs.
Noise is less than 45dB, suitable for repair benches and training rooms.

Configuration options

Quote the product alone or build it into a repair kit

Before quotation, confirm voltage version, plug type, order quantity, destination country and package requirement.

Standard

Standard package

Host machine with hot air gun handle, hot air gun rack, nozzle set and user manual.

Compact

Single hot air station option

Use this model when the buyer wants a compact unit focused on hot air rework.

Repair shop

Repair bench kit

Add nozzle sizes, spare heating core and hot air bench support items according to the buyer’s repair work.

Distributor

Bulk order quote

Confirm voltage version, plug type, carton quantity, packaging requirement and destination country before quotation.

Typical applications

Where buyers can use this model

Electronic product assembly

Product development and research departments

Electronic product maintenance

Electrical repair operation

Skill training in electronic institutions

Phone repair and PCB rework benches

Standard configuration

Physical items included in the package

Package items are listed separately from operation details so buyers can confirm what is included.

Host machine with hot air gun handle: 1 pcs
Hot air gun rack: 1 pcs
Nozzles: 3 pcs (8mm, 10mm, 12*12mm)
User manual: 1 pcs

Technical specifications

Key parameters for buyer confirmation

Hot air gun
Model	868D
Input voltage	220V-240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption	700W
Weight	1.36kg
Inner box size	260165152mm
Packing quantity	6 pieces / box
Outer packing size	350275500mm
Working voltage	220V-240V/AC, 50Hz (110V/AC, 60Hz)
Power dissipation	700W
Display form	LED digital, resolution 1C
Heating element	Skeleton type ceramic heating core
Temperature range	100C-480C
Temperature stability	+/-1C
Air flow type	Brushless fan soft wind
Gas flow	120 L/min max
Noise	Less than 45dB
Handle length	About 100cm including handle line

Optional add-on support

Hot air spare parts, nozzle options and bench support

For repair shops and distributors, keep the 868D support plan focused on hot air maintenance parts, nozzle sizes and basic workbench support. Soldering consumables are quoted separately only when the buyer also needs soldering tools.

Available add-on support. Tell us your repair work, quantity and restocking needs, and we can help match suitable spare parts and accessories with the machine.

Replacement parts

Useful for after-sales service and long-term repair bench operation.

Hot air heating core
Nozzle set support can be confirmed by order requirement
Hot air gun rack by order requirement
Power switch and control parts for service support

Hot air heater

Working accessories

Confirm nozzle and holder compatibility by model before bulk order.

8mm hot air nozzle
10mm hot air nozzle
12*12mm hot air nozzle
Additional nozzle sizes for different component areas

5mm nozzle

8mm nozzle

13mm nozzle

Workbench support items

Use these only as optional repair bench support when the buyer asks for a wider starter kit.

Cleaning sponge or brass wire for general bench maintenance
Heat-shrink tubing for cable repair work when needed
Additional bench support items can be confirmed separately

Need 868D for repair shop, distributor or bulk order?

Send your required voltage, plug type, quantity and destination country. We can help confirm package options and quotation details.

Request Quote

SAIKE 3005D DC regulated power supply 30V 5A

SAIKE — Mon, 29 Jan 2024 07:43:33 +0000

Features
1. This DC regulated power supply is designed for scientific research, product development, laboratories, schools, production lines and electronic maintenance and other places of high-precision DC voltage regulated switching power supply. It features a uniquely designed LED display that visually displays output voltage and current. At the same time, it adopts continuously adjustable output voltage and current design, can automatically adjust the working mode within the set rated range, according to the load demand to achieve constant voltage or constant current, so as to effectively avoid possible damage to the load equipment.
2. This DC regulated power supply has the advantages of high efficiency, strong carrying capacity and low noise. The back is provided with a fuse holder, and the exposed part of the metal is connected with a ground wire to provide comprehensive protection for the safety of electricity.
3. This DC regulated power supply has the characteristics of high voltage stability, small ripple coefficient and perfect protection design. Including short-circuit protection, over-current protection and over-temperature protection and other functions to ensure that the equipment can operate safely and stably under various conditions.
4. This DC regulated power supply has the advantages of small volume, light weight and convenient transportation and carrying.
5. Users can easily switch between over current off and constant current protection modes by pressing a button, which is suitable for a wider range of loads. In the overcurrent shutdown mode, once the load current exceeds the preset value, the power supply will immediately cut off the output to ensure the load safety, and automatically resume normal work after troubleshooting. In the constant current protection mode, when the load current exceeds the preset value, the power supply will limit the current and reduce the voltage, and the load current will be controlled at the same level as the preset value, so as to effectively avoid all kinds of accidental interference and load damage.
6. This DC regulated power supply has USB fast charging function, support QC2.0, QC3.0 fast charging protocol, mobile phone charging faster.
7. DC regulated power supply can output DC voltage, not only can be used as a mobile phone, computer and other maintenance power supply, but also can be used to check and repair other electronic circuits or components.
8. The voltage of the DC regulated power supply is provided with two ranges of 0~5V/0~30V. When used for mobile phone inspection and maintenance, switching to 0-5V is more conducive to the safe use of mobile phones and improve the safety performance of products.

Parameters

Model:	3005D
Input voltage:	220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption:	220W
Weight:	2kg
Inner box size:	293146180mm
Packing quantity:	9 Piece / boxes
Outer packing size:	300450560mm
DC regulated power supply
Working voltage:	220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption:	150W
Display form:	Digital display
Voltage display precision:	<0.1%+0.01V
Current display precision:	<0.2%+5mA
Output voltage:	0~30V
Output current:	0~5A
General parameters
Operating Temperature:	-10℃~40℃
Relative Humidity:	<90%
Load stability:	≤0.5%+3mV
Ripple noise:	Vrms<0.2%(10Hz-1MHz)
USB
Output Voltage:	DC 5V/9V/12V±0.2V
Output Power:	20W
Voltage Precision:	0.1V
Current Precision:	0.4%+10mA
Current Protection:	4A/2.5A/2A

Standard Configuration
Host machine: 1 pcs
Output line: 1 pcs
User manual: 1 pcs

Constant voltage and Constant current (C.V/C.C) principle
The 3005D DC power supply can be automatically converted in constant voltage or constant current operating mode. It transforms its state by comparing the value of the load current and the limit current.
Constant Voltage Mode (C.V) :
1. When the load current value is less than the set output current limit value, the power supply will work in constant voltage mode.
2. In this mode, the constant voltage indicator light on the panel will light up.
3. The output voltage will be controlled to be the same as the set value, and the current will change according to the load.
Constant Current Mode (C.C) :
1. When the load current value is greater than the set output current limit value, the power supply will work in constant current mode.
2. In this mode, the constant current indicator light on the panel will light up.
3. The output current will be controlled to the same value as the set output current limit.
4. Because the output power is limited and cannot be overloaded, the output voltage will be lower than the set value.
5. Once the output current is lower than the set output current limit value, the power supply will automatically switch to the constant voltage working state.

Application
1. Electronic product assembly
2. Product development in scientific research departments
3. Electronic products maintenance
4. Factory production line
5. Skill training in all kinds of electronic institutions

About DC regulated power supply
By output dc voltage, measurement and fault diagnosis of electronic components.
1. Dc voltage regulator power supply can provide reliable DC voltage for circuit boards and electronic devices to ensure their normal operation and stability, so as to facilitate debugging, testing or repair and other fault judgment.

Related Names
Adjustable Power Supply | Voltage Controlled Device | Variable Regulated Power Supply

SAIKE 1505D DC voltage regulated switching power supply 15V 5A

SAIKE — Mon, 29 Jan 2024 07:43:32 +0000

Features
1. This DC regulated power supply is designed for scientific research, product development, laboratories, schools, production lines and electronic maintenance and other places of high-precision DC voltage regulated switching power supply. It features a uniquely designed LED display that visually displays output voltage and current. At the same time, it adopts continuously adjustable output voltage and current design, can automatically adjust the working mode within the set rated range, according to the load demand to achieve constant voltage or constant current, so as to effectively avoid possible damage to the load equipment.
2. This DC regulated power supply has the advantages of high efficiency, strong carrying capacity and low noise. The back is provided with a fuse holder, and the exposed part of the metal is connected with a ground wire to provide comprehensive protection for the safety of electricity.
3. This DC regulated power supply has the characteristics of high voltage stability, small ripple coefficient and perfect protection design. Including short-circuit protection, over-current protection and over-temperature protection and other functions to ensure that the equipment can operate safely and stably under various conditions.
4. This DC regulated power supply has the advantages of small volume, light weight and convenient transportation and carrying.
5. Users can easily switch between over current off and constant current protection modes by pressing a button, which is suitable for a wider range of loads. In the overcurrent shutdown mode, once the load current exceeds the preset value, the power supply will immediately cut off the output to ensure the load safety, and automatically resume normal work after troubleshooting. In the constant current protection mode, when the load current exceeds the preset value, the power supply will limit the current and reduce the voltage, and the load current will be controlled at the same level as the preset value, so as to effectively avoid all kinds of accidental interference and load damage.
6. This DC regulated power supply has USB fast charging function, support QC2.0, QC3.0 fast charging protocol, mobile phone charging faster.
7. DC regulated power supply can output DC voltage, not only as a mobile phone maintenance power supply, but also can be used to check and repair other electronic circuits or components.
8. The voltage of the DC regulated power supply is provided with two ranges of 0~5V/0~15V. When used for mobile phone inspection and maintenance, switching to 0-5V is more conducive to the safe use of mobile phones and improve the safety performance of products.

Parameters

Model:	1505D
Input voltage:	220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption:	120W
Weight:	2kg
Inner box size:	293146180mm
Packing quantity:	9 Piece / boxes
Outer packing size:	300450560mm
DC regulated power supply
Working voltage:	220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption:	75W
Display form:	Digital display
Voltage display precision:	<0.1%+0.01V
Current display precision:	<0.2%+5mA
Output voltage:	0~15V
Output current:	0~5A
General parameters
Operating Temperature:	-10℃~40℃
Relative Humidity:	<90%
Load stability:	≤0.2%+3mV
Ripple noise:	Vrms<0.2%(10Hz-1MHz)
USB
Output Voltage:	DC 5V/9V/12V±0.2V
Output Power:	20W
Voltage Precision:	0.1V
Current Precision:	0.4%+10mA
Current Protection:	4A/2.5A/2A

Standard Configuration
Host machine: 1 pcs
Output line: 1 pcs
User manual: 1 pcs

Constant voltage and Constant current (C.V/C.C) principle
The 1505D DC power supply can be automatically converted in constant voltage or constant current operating mode. It transforms its state by comparing the value of the load current and the limit current.
Constant Voltage Mode (C.V) :
1. When the load current value is less than the set output current limit value, the power supply will work in constant voltage mode.
2. In this mode, the constant voltage indicator light on the panel will light up.
3. The output voltage will be controlled to be the same as the set value, and the current will change according to the load.
Constant Current Mode (C.C) :
1. When the load current value is greater than the set output current limit value, the power supply will work in constant current mode.
2. In this mode, the constant current indicator light on the panel will light up.
3. The output current will be controlled to the same value as the set output current limit.
4. Because the output power is limited and cannot be overloaded, the output voltage will be lower than the set value.
5. Once the output current is lower than the set output current limit value, the power supply will automatically switch to the constant voltage working state.

Related Names
Adjustable Power Supply | Voltage Controlled Device | Variable Regulated Power Supply

SAIKE 305D DC regulated power supply 30V 5A

SAIKE — Mon, 29 Jan 2024 07:43:31 +0000

Features
1. This DC regulated power supply is a high-precision single-output DC power supply with continuously adjustable output voltage and current. It can automatically adjust the working mode within the set rating range, and achieve constant voltage or constant current according to the load demand, effectively avoiding the damage that may be caused to the load equipment. In addition, you can choose two different range current output options by pressing the button to switch between 0~5A and 0~999mA. As an important tool in the communication industry, the power supply is widely used in the production line, maintenance and commissioning of telecommunications products, and is also widely used in laboratories and other places.
2. The back of the DC regulated power supply is provided with a fuse holder, and the exposed part of the metal is connected with a ground wire to provide comprehensive protection for the safety of electricity.
3. DC regulated power supply also has the functions of limiting current, reducing voltage, short-circuit protection, over-temperature protection, etc., so as to avoid all kinds of unexpected interference and burning load phenomenon.
4. DC regulated power supply can output DC voltage, not only can be used as a mobile phone, computer and other maintenance power supply, but also can be used to check and repair other electronic circuits or components.

Model

302D:	Output voltage: 0-30V; Output current: 0-2A;
303D:	Output voltage: 0-30V; Output current: 0-3A;
305D:	Output voltage: 0-30V; Output current: 0-5A;
3010D:	Output voltage: 0-30V; Output current: 0-10A;
603D:	Output voltage: 0-60V; Output current: 0-3A;
605D:	Output voltage: 0-60V; Output current: 0-5A;

Parameters

Model:	305D
Input voltage:	220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption:	150W
Weight:	4.85kg
Inner box size:	mm
Packing quantity:	4 Piece / boxes
Outer packing size:	370325420mm
DC regulated power supply
Working voltage:	220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption:	150W
Display form:	PS series for LED three digital tube display
Voltage display precision:	0.1V
Current display precision:	1mA
Output voltage:	0~30V
Output current:	0~5A
General parameters
Operating Temperature:	-10℃~40℃
Relative Humidity:	<90%
Storage Temperature:	-10℃~40℃
Storage humidity:	<80%
Steady voltage state
Voltage stability:	≤0.01%+2mV
Load stability:	≤0.01%+2mV
Recovery time:	≤100uS
Ripple noise:	≤1mVrms (Effective value)
Temperature coefficient:	≤200PPM/℃
Steady current state
Current stability:	≤0.1%+3mA
Load stability:	≤0.02%+3mA
Ripple noise:	2mArms (Effective value)

Standard Configuration
Host machine: 1 pcs
User manual: 1 pcs

Constant voltage and Constant current (C.V/C.C) principle
The 305D DC power supply can be automatically converted in constant voltage or constant current operating mode. It transforms its state by comparing the value of the load current and the limit current.
Constant Voltage Mode (C.V) :
1. When the load current value is less than the set output current limit value, the power supply will work in constant voltage mode.
2. In this mode, the constant voltage indicator light on the panel will light up.
3. The output voltage will be controlled to be the same as the set value, and the current will change according to the load.
Constant Current Mode (C.C) :
1. When the load current value is greater than the set output current limit value, the power supply will work in constant current mode.
2. In this mode, the constant current indicator light on the panel will light up.
3. The output current will be controlled to the same value as the set output current limit.
4. Because the output power is limited and cannot be overloaded, the output voltage will be lower than the set value.
5. Once the output current is lower than the set output current limit value, the power supply will automatically switch to the constant voltage working state.

Related Names
Adjustable Power Supply | Voltage Controlled Device | Variable Regulated Power Supply

SAIKE 1503D DC voltage regulated switching power supply 15V 3A

SAIKE — Mon, 29 Jan 2024 07:43:31 +0000

Features
1. This DC regulated power supply is specially designed for laboratories, schools, production lines and electronic maintenance and other places of high-precision DC voltage regulator switching power supply, with output and measurement dual functions. It adopts continuously adjustable output voltage and current design, can automatically adjust the working mode within the set rated range, according to the load demand to achieve constant voltage or constant current, so as to effectively avoid possible damage to the load equipment.
2. The back of the DC regulated power supply is provided with a fuse holder to provide comprehensive protection for power safety.
3. DC regulated power supply also has the functions of limiting current, reducing voltage, short-circuit protection, over-temperature protection, etc., so as to avoid all kinds of unexpected interference and burning load phenomenon.
4. DC regulated power supply can output DC voltage, not only as a mobile phone maintenance power supply, but also can be used to check and repair other electronic circuits or components.
5. This DC regulated power supply is small in size and light in weight, convenient for transportation and carrying.
6. This DC regulated power supply has a 5V 2A USB output interface, which is convenient for charging devices such as mobile phones and tablets.
7. This DC regulated power supply is equipped with mobile phone radio frequency detection function, and the mobile network is more sensitive.
8. This DC regulated power supply has the function of testing DC voltage, and can measure 0-50V voltage after switching to the voltage test file.
9. The voltage of the DC regulated power supply is provided with two ranges of 0~5V/0~15V. When used for mobile phone inspection and maintenance, switching to 0-5V is more conducive to the safe use of mobile phones and improve the safety performance of products.
10. The current of the DC regulated power supply is provided with 3A/2A/0.3A three ranges, according to the use of different ranges, more fine display of current.

Parameters

Model:	1503D
Input voltage:	220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption:	45W
Weight:	1.6kg
Inner box size:	mm
Packing quantity:	8 Piece / boxes
Outer packing size:	720225495mm
DC regulated power supply
Working voltage:	220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption:	45W
Display form:	Voltage digital display, Ammeter pointer
Voltage display precision:	0.1V
Current display precision:	15mA
Output voltage:	0~15V
Output current:	0~3A
General parameters
Operating Temperature:	0℃~40℃
Relative Humidity:	<80%
Storage Temperature:	-10℃~40℃
Storage humidity:	35%~45%
Steady voltage state
Voltage stability:	≤0.01%+3mV
Load stability:	≤0.01%+3mV
Recovery time:	≤100uS
Ripple noise:	≤0.1%Vrms
Temperature coefficient:	≤300PPM/℃
Steady current state
Current stability:	≤0.1%+3mA
Load stability:	≤0.1%+3mA
Ripple noise:	≤0.1%Arms

Standard Configuration
Host machine: 1 pcs
User manual: 1 pcs

Constant voltage and Constant current (C.V/C.C) principle
The 1503D DC power supply can be automatically converted in constant voltage or constant current operating mode. It transforms its state by comparing the value of the load current and the limit current.
Constant Voltage Mode (C.V) :
1. When the load current value is less than the set output current limit value, the power supply will work in constant voltage mode.
2. In this mode, the constant voltage indicator light on the panel will light up.
3. The output voltage will be controlled to be the same as the set value, and the current will change according to the load.
Constant Current Mode (C.C) :
1. When the load current value is greater than the set output current limit value, the power supply will work in constant current mode.
2. In this mode, the constant current indicator light on the panel will light up.
3. The output current will be controlled to the same value as the set output current limit.
4. Because the output power is limited and cannot be overloaded, the output voltage will be lower than the set value.
5. Once the output current is lower than the set output current limit value, the power supply will automatically switch to the constant voltage working state.

About DC regulated power supply
By output and to measure dc voltage, measurement and fault diagnosis of electronic components.
1. Dc voltage regulator power supply can provide reliable DC voltage for circuit boards and electronic devices to ensure their normal operation and stability, so as to facilitate debugging, testing or repair and other fault judgment.

Related Names
Adjustable Power Supply | Voltage Controlled Device | Variable Regulated Power Supply

SAIKE 9936 40W Soldering iron Adjustable temperature

SAIKE — Mon, 29 Jan 2024 07:43:30 +0000

Features
1. The machine adopts portable design, efficient switching power supply and power control system integrated design, light weight, small size. Easy to carry, easy to operate, wide range of applications. It is suitable for worldwide use without a power adapter.
2. Using microcomputer processor PID program control technology, the program tracks the actual temperature of the soldering iron at a high speed in milliseconds, the fast temperature compensation speed enhances the temperature stability, the temperature static error is small, the temperature compensation is fast, and can adapt to various harsh environments.
3. Various parts of machine device are have self-deteetion function, full intelligent over-temperature, short circuit, open circuit, overload failure have display and protection.
4. The exposed part of the soldering iron metal is connected with a ground wire to provide comprehensive protection for the safety of electricity.
5. Soldering iron uses 132A ceramic heating core, stable heating, rapid warming, reduce loss, long service life.
6. Iron part is anti-static design, to prevent electrostatic damage to delicate SMD components.

Parameters

Model:	9936
Input voltage:	110V~240V/AC, 50Hz~60Hz
Power consumption:	40W
Weight:	0.72kg
Inner box size:	220155105mm
Packing quantity:	16 pieces / box
Outer packing size:	470340450mm
Soldering iron
Working voltage:	24V/AC
Power consumption:	40W
Display form:	LED digital (Resolution 1℃)
Temperature range:	200℃－480℃
Heating element:	132A ceramic heating core
Temperature stability:	±2℃(no load)
Handle length:	About 100cm(Including handle line)

Standard Configuration
Host machine: 1 pcs
Soldering iron handle (include iron tip and heater): 1 pcs
Soldering iron holder (include Cleaning sponge): 1 pcs
User manual: 1 pcs

Application
1. Electronic product assembly
2. Product development in scientific research departments
3. Electronic products maintenance
4. Electrical soldering operation
5. Skill training in all kinds of electronic institutions

About the Soldering iron
By heating the welding tip to conduct heat to heat the solder and melt it, to achieve the desoldering of electronic components.
1. Suitable for small solder joints or pads, such as thinner, smaller welding materials, no surrounding metal and other heat-absorbing parts.
2. For relatively thick and large solder joints and pads, you can try replacing the soldering iron tip with a larger contact area or use a hot air gun for welding.

Related Names
Low Temperature Lead Free Soldering Tool | Electronics Soldering Device | Thermostat Soldering Station

SAIKE 1502DD DC regulated power supply 15V 2A

SAIKE — Mon, 29 Jan 2024 07:43:30 +0000

Features
1. This DC regulated power supply adopts high efficiency turn-off protection technology to ensure high precision DC voltage regulation output. Its fast protection mechanism can cut off the output in time to avoid damage to the load when the load is overcurrent or short circuit. After the fault is rectified, the power supply automatically recovers. In addition, it has five different voltage output options, providing special features that facilitate different equipment maintenance. The universal output terminal design makes it suitable for a variety of scenarios, including laboratories, schools and production lines.
2. DC regulated power supply has six voltage gears, the first five gears (1.5V, 3.6V, 4.8V, 6.0V, 7.2V) are fixed voltage gear, while the last gear is 0-15V adjustable gear. In the last adjustable position, the output voltage can be adjusted freely.
3. DC regulated power supply also has a current limiting adjustment function. The current limit range can be set to 0.6 to 2A as required. When the current exceeds the preset value, the power supply will automatically cut off the output until the fault is eliminated and can be automatically restored. This automatic shut-off function ensures the safety and stability of the power supply in case of overload.
4. The back of the DC regulated power supply is provided with a fuse holder to ensure the safety of electricity consumption.
5. DC regulated power supply part is equipped with continuous short-circuit protection and recovery function to avoid all kinds of unexpected interference burning load phenomenon.
6. DC regulated voltage power supply can output DC voltage, not only as a mobile phone repair power supply, but also can be used to check and repair other electronic circuits or components.

Parameters

Model:	1502DD
Input voltage:	220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption:	30W
Weight:	1.48kg
Inner box size:	mm
Packing quantity:	12 Piece / boxes
Outer packing size:	498425350mm
DC regulated power supply
Working voltage:	220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption:	30W
Display form:	LED digital
Voltage display precision:	0.1V
Current display precision:	10mA
Output voltage:	0~15V
Output current:	0~2A
Overload current:	0.6~2A
General parameters
Operating Temperature:	-10℃~40℃
Relative Humidity:	<90%
Storage Temperature:	-20℃~40℃
Storage humidity:	<80%
Power stability:	≤0.01%±2mV
Load Rated degrees:	≤0.01%±2mV ( 1mav < 1A )
Ripple noise:	≤0.5mVrms ( 5Hz – 1MHz ) lomax greater than 1A
Temperature Coefficient:	≤300PPM/℃

Standard Configuration
Host machine: 1 pcs
User manual: 1 pcs

Related Names
Voltage Regulated Power Supply | Electrician Power Device | Stabilized DC Power Source

SAIKE 908D 65W Soldering iron Adjustable temperature

SAIKE — Mon, 29 Jan 2024 07:43:29 +0000

Features
1. Using microcomputer processor PID program control technology, the program tracks the actual temperature of the soldering iron at a high speed in milliseconds, the fast temperature compensation speed enhances the temperature stability, the temperature static error is small, the temperature compensation is fast, and can adapt to various harsh environments.
2. Various parts of machine device are have self-deteetion function, full intelligent over-temperature, short circuit, open circuit, overload failure have display and protection.
3. The exposed part of the soldering iron metal is connected with a ground wire to provide comprehensive protection for the safety of electricity.
4.Soldering iron has a temperature lock switch to prevent random change of the set welding temperature.
5.Soldering iron has a 10-minute fixed hibernation function. When no one is in use, the soldering iron is at rest. After about 10 minutes, the soldering iron will enter the hibernation state.
6. Soldering iron uses 908D ceramic heating core, peak heating, rapid heating, and fast temperature compensation function. Therefore, it is very suitable for the diswelding of various solder joints, especially for the diswelding of large solder joints, rough blocks and miscellaneous difficult solder joints.
7. Iron part is anti-static design, to prevent electrostatic damage to delicate SMD components.
8. Using Ferro-alloy Soldering iron seat, durable, avoid burns.

Parameters

Model:	908D
Input voltage:	220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption:	65W
Weight:	0.7kg
Inner box size:	22015387mm
Packing quantity:	20 pieces / box
Outer packing size:	465325360mm
Soldering iron
Working voltage:	220V~240V/AC, 50Hz (110V/AC, 60Hz)
Rated power:	18W
Power consumption:	65W
Maximum power:	130W
Display form:	LED digital (Resolution 1℃)
Temperature range:	90℃－480℃
Heating element:	908D ceramic heating core
Temperature stability:	±2℃(no load)
Handle length:	About 100cm (Including handle line)

Standard Configuration
Host machine (include soldering iron handle and power plug): 1 pcs
Soldering iron holder (include Cleaning sponge): 1 pcs
User manual: 1 pcs

About the Soldering iron
By heating the welding tip to conduct heat to heat the solder and melt it, to achieve the desoldering of electronic components.
1. Suitable for relatively larger solder joints or pads to provide enough heat for better completion of welding operations.
2. For thicker and larger solder joints and pads, you can try replacing the soldering iron tip with a larger contact area or use a hot air gun for welding.

Related Names
Digital Soldering Equipment | Heavy Duty Soldering Iron | Corded Desoldering Iron

SAIKE 947-Ⅱ 60W Soldering iron Adjustable temperature

SAIKE — Mon, 29 Jan 2024 07:43:28 +0000

Features
1. Soldering iron is made of a new environmentally friendly plastic material, and the front end of the handle is covered with a silicone sheath, which not only has high temperature resistance, but also provides a non-slip frosted touch. The overall mini design is simple and practical, both beautiful and practical.
2. Soldering iron shows high stability in structure and performance, ensuring the stability and durability of long-term use, and providing continuous and reliable work support for users.
3. Soldering iron adopts 947 ceramic heating core, with energy-saving and efficient, fast heating and fast temperature compensation functions, bringing excellent user experience.
4. Soldering iron adopts anti-static design to effectively prevent electrostatic damage to precision SMD components and improve production safety and reliability.
5. Soldering iron power plug can be selected according to demand, equipped with metal exposed part and ground wire connection, in order to meet the anti-static requirements of different occasions, to provide comprehensive protection for the safety of electricity.
6. Soldering iron adopts universal equipment design, which is easy to maintain and replace parts of the equipment, improve the use efficiency and reduce the use cost.
7. Iron tip adopts 900M-T series, which is suitable for a variety of lead-free welding processes to meet different production needs.
8. Equipped with simple soldering iron holder, durable, safe to use, avoid burn accidents, improve work efficiency.

Parameters

Model:	947-Ⅱ
Input voltage:	220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption:	60W
Weight:	0.16kg
Inner box size:	2707060mm
Packing quantity:	50 pieces / box
Outer packing size:	550325360mm
Soldering iron
Working voltage:	220V~240V/AC, 50Hz (110V/AC, 60Hz)
Rated power:	18W
Maximum power:	60W
Display form:	Scale indication (LED heating indicator)
Temperature range:	200℃－450℃
Heating element:	947 ceramic heating core
Temperature stability:	±2℃(no load)
Handle length:	About 100cm(Including handle line)

Standard Configuration
Soldering iron handle (include iron tip, heater and power plug): 1 pcs
Simple soldering iron holder: 1 pcs
User manual: 1 pcs

Related Names
Low Temperature Lead Free Soldering Tool | Electronics Soldering Device | Soldering Iron

SAIKE 933 60W Externally heated type Soldering iron Adjustable temperature

SAIKE — Mon, 29 Jan 2024 07:43:28 +0000

Features
1. Soldering iron uses the latest temperature control circuit to achieve accurate temperature control.
2. Soldering iron adopts high-quality and durable external heating core, long service life.
3. Soldering iron is made of new environmentally friendly plastic materials, and a high temperature isolation ring is added between the handle and the heating steel pipe to effectively heat insulation and increase the comfort of use.
4.The exposed part of the soldering iron metal is connected with a ground wire to provide comprehensive protection for the safety of electricity.
5. Soldering iron adopts anti-static design to effectively prevent electrostatic damage to precision SMD components and improve production safety and reliability.
6. Soldering iron is equipped with soldering wire rack and soldering iron holder, the whole machine is integrated, the mini shape design is simple and practical, both beautiful and practical.

Note: When used for the first time, the soldering iron may produce smoke, which is a normal phenomenon, please feel free to use.
The reason is that the mica paper on the heating core of the new iron may have mica particles, which will produce smoke after heat oxidation, and will return to normal after several times of use.

Parameters

Model:	933
Input voltage:	220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption:	60W
Weight:	0.56kg
Inner box size:	245125100mm
Packing quantity:	16 pieces / box
Outer packing size:	510270430mm
Soldering iron
Working voltage:	220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption:	60W
Display form:	LED digital (Resolution 1℃)
Temperature range:	200℃－500℃
Heating element:	60W external heating core
Temperature stability:	±2℃(no load)
Handle length:	About 100cm (Including handle line)

Standard Configuration
Host machine: 1 pcs
Soldering iron handle (include iron tip and heater): 1 pcs
Soldering iron holder (include Cleaning sponge): 1 pcs
User manual: 1 pcs

Related Names
Soldering Tool | Electronics Soldering Device | External Heating Type Soldering Iron