///SAIKE 2008D Hot air Rework station
SAIKE 2008D Hot air Rework station 2019-01-18T11:29:02+00:00

Project Description

1. SAIKE 2008D hot air rework station is small and delicate with the aluminum alloy case and panel.
2. It has three storage locations, separately used to set or store different temperature and air volume values. Based on the actual application requirements, you can speedily adjust the storage unit settings with the shortcut keys. So to speak, our equipment is extremely suitable for the standardized assembly line production.
3. The rework station can achieve the real-time tracking and real-time correction of air outlet temperature, since it is equipped with the microcomputer PID program. The PID temperature correction cycle is 100ms. Due to the rapid correction of the temperature, the equipment is low in power consumption.
4. SAIKE 2008D hot air rework station adopts the brushless fan which comes with long service life but low noise generation. Additionally, it is doubled in working efficiency, because of the high quality heating element used to the brushless fan.
5. Its air gun handle utilizes the high quality skeleton heater. This type of heater is durable in use, and offers high efficiency. Besides that, the air gun handle comes with the security protection function. When power on, the handle must be at frame, so that the machine can start working properly.
6. Finally, our SAIKE 2008D hot air rework station can automatically detect the failures. If there are any failures, it will send out alarming signals.


Model  2008D
Type  LED digital display
Input voltage  220V/50Hz(110V/60Hz)
Weight  1.9kg
Case size  150cm*100*138mm
Inner box size  260*166*155mm
Packing quantity  12 Piece / boxes
Outer packing size  540*350*480mm
Hot air
Working voltage  AC220V/50HZ(AC110V/60Hz)
Power dissipation  700W
Heating element  Skeleton type ceramic heating core
Temperature range  100℃-500℃
Display form  LED digital (resolution 1℃)
Temperature stability  ±1℃
Type of air flow  Brushless fan soft wind
Gas flow  120 L/min(max)
Noise  Less than 45dB
Handle length  About 100cm(Including handle line)

Standard Configuration
Machine: 1pc
Manual: 1pc
Air gun handle: 1pc
Nozzles: 4pcs (5mm, 8mm, 10mm, 12*12mm)
Handle frame: 1pc
Power plug: 1pc

SAIKE 2008D hot air rework station can be used to weld SMD components, multi-pin IC, and circuit board components, in the areas including laboratories, schools, electronic production lines, mobile phone repair industry, and home appliance maintenance department.

Related Names
Digital Soldering Station | SMD Desoldering Tool | Electronic Parts Soldering Machine